After several months I worked at a repair shop or Telphone mobile phones, so I know a lot of things damage your mobile phone or handheld Telphone. This time I will explain some common things and cause damage to the phone.
The real cause of the damage was trivial mobile phone, but due to lack of nurses and wrong way to make phone mengunakanyang quickly broken. And of some damage to Mobile Batteries, LCD screen, Memory, Key Pad and Bluethoot are most often damaged. Okey we just discussed one by one:
Battery
Five Damage Occurs Frequently Battery:
1. Distension due to short-circuit the battery or shorting due to sudden fall or submerged in water. As a result the contents of the batteries quickly drained the battery so that the tube gets hot and bubbling.
2. Battery often drop.
There are several causes of this is the case, including the batteries are not good quality, the age factor for decline in value mAh battery (DC current pressure), and shorting occurs.
3. Because of damage to the battery hot plate temperature control inside the battery. There is a component on a flat battery which controls the voltage basar little incoming or outgoing. This damage resulted in the supply current is not normal and makes the battery hot.
4. Battery no flow at all because of the short circuit (short circuit) on the machine which impact on mobile phone batteries. Batteries typically do not have a fuse that could break the current automatically issued. Other causes such as the battery has not been used or in-charge.
5. Can not charge the battery. Could be caused by hapenya or phone connection to the batteries that are not connected even less well. Other causes in the charger. If the problem is the battery, it needs to be replaced. Damage to the cell in the battery tube that has been frozen and can not accept and accommodate the incoming flow.
5 Ways to Maintain Battery:
1. Do not often jamming phone charge in living conditions. In-charge when the phone is off, when the battery is full then the charging will be stopped by the charger IC is in charge of controlling the charging battery. But if the conditions of life, so it would not be effective and could make the charge defective IC and make a battery charger be damaged by voltage los (without inhibitors and breakers anymore).
2. Do not call the phone in-charge condition. Because it will drain battery power. Moreover, until the phone gets hot for too long to call. The incoming voltage from the charger will be directly issued in large numbers so that will make the battery tube becomes hot and bubbling.
3. Because when phone is turned requires 0.4 ampere flows, then when the phone is looking for signals requiring 0.4 ampere flows, then when the lamp requires a voltage of 0.3 amperes phone. So if too often revive and off the phone by removing the risk of battery battery will quickly drop.
4. Avoid charging the charger imitation. Quality standards do not make the batteries to be easily damaged. Due to excessive current into the battery without the charger IC is controlled. Usually charger imitation issued an unstable flow.
5. Immediately charge the batteries, do not wait for low-or dead bat. Because it can make a cell in the battery tube and the vacuum becomes weak. Finally the battery so the drop, even destroyed. Because the DC value dropped from 3.6 volts to 2 or 1 volt. If below 3.0 volt battery can not charge more current.
LCD
5 Damage to the LCD (screen) that often occurs:
1. Blank or no form of display. Because there is an unbroken line, liquid-resolution LCD is damaged, or it could be due to lack of machines connected to the phone. Usually caused by a fall that shifted or interrupted line connector on the flexible cable clamshell phone.
2. Broken LCD due to the crunch, falling or depressed. For this it is definitely broken LCD should be replaced. The more advanced or rare LCD screen, the more expensive price.
3. There are lines on the screen. This damage is not fatal if the line is there is only one. But if there are more than 5 lines, and its position in the middle would be quite disturbing.
4. Blurry, mostly due to aging LCD. Or because the quality of LCD is not good.
5. Spots or stains on the LCD. Often caused by fluid that has begun to break out in groups. The problem is caused by aging or LCD LCD is never depressed or comes to the crunch.
5 Tips For LCD Autos:
1. Avoid direct sunlight for a long time (3 to 4 hours) because it will make the sharpness of LCD pixels to fade and become blurry.
2. Keep away from water, moisture or the like. Because the LCD is very susceptible to water damage that could make LCD total.
3. Avoid heavy impact because it will make the LCD breaks and cracks.
4. Avoid storing phone in a tight jeans pocket because it can be stressed and may break the LCD.
5. Keep away from children and places that allow this phone can be dropped.
KEYPAD
5 Causes of Damage Keypad Frequently Occurs:
1. Because dirty or corrosion caused by excess water or moisture that has been formed rust and prevents key press. The key characteristics can still function but must be strongly suppressed.
2. Because the replacement of the casing is not the original casing or due to the size of the keypad keys do not match.
3. There is an unbroken line keypad. Usually the keys are not working is not just one button, there could be 4 buttons and it can not be suppressed.
4. Button keypad connector (which connects to the machine phone keypad) dirty, or loose. This problem often occurs on the keypad of his mobile phone apart from the engine.
5. CPU and keypad driver IC fractured his leg in the path of the keypad buttons. Caused by concussion or crust on the IC legs.
5 Ways to Handle Damage Keypad :
1. When the keypad is pressed hard but still able to function, the solution is simply to open the case and clean phone keypad problems with a pencil eraser.
2. If damage due to the replacement of the casing should we look for the KW1 or original casing. It's a little expensive but it does not pose a problem.
3. If the keypad does not work because there are broken lines, the solution is to do the jumper on the track and a guide to reading proficiency level scheme of the path. If you do not understand, ask for help from the technicians who are professional.
4. If the damage is only because we simply tighten loose screws with a screwdriver phone.
5. For the problem of faulty CPU and driver, this phone should be handled by qualified and well versed in the art. Because if it is wrong in the handling, HAPE can die due to IC total CPU when picked up by a technician who does not understand and the less experienced can be a total failure gatot alias permanently.
MEMORY
5 Damage Occurs Frequently Internal Memory:
1. Hape a total death due to any one of the missing data or because the data storage media is damaged. Since all the operating data contained in the internal memory phone.
2. Hang. If the data is too full in the program as a result of internal memory can not be processed by the CPU as the data is too dense. Finally, performance is slow and the phone is not optimal.
3. Up close (delete some data). This article comes when we will store any data on the phone. Or even when we will open it says the phone menu. This damage was caused by garbage files accumulate in the internal memory.
4. Blink.
Hape blink is where the phone can not be loading or booting to the menu. This damage is caused by some files that are not legible because of improper positioning and placement so that the system can not be loading normally. The cause is an excessively full, virus, causing heavy impact vibration to the IC so that no files are missing or damaged.
5. Restart. Hape hape restart is where the current is turned off shortly thereafter and direct their own lives (life and death itself) repeatedly. This is due to missing system files, or data is too full.
5 Ways to Avoid Damage to Internal Memory :
1. Always diligent in deleting the data that is not used, for example SMS or phonebook which is no longer needed.
2. Does not keep applications and games on the internal memory.
3. Always check the internal memory capacity. Empty space must have a minimum 20% of total capacity.
4. Avoid storing photos or video in the internal memory.
5. Every two months, do a master reset on the phone for junk files left in the memory can be cleared. Including viruses.
BLUETOOTH
5 Damage Bluetooth feature :
1. Can not send files. This damage is due to an error setting the phone or too full of data on phone memory.
2. Can only accept files only. This damage is because the data is too full or there are lots of junk files on internal memory, making Bluetooth software does not work well.
3. Gallery on the phone can not be opened. This damage caused the crash between the data and data Bluetooth phone. Because Bluetooth has its own distinct software with phone software. However, if the Bluetooth module breakdown at a certain hape hape gallery can not be opened.
4. Bluetooth can not be activated. This damage is caused by errors in the software or program on the phone. Or it could also be caused by damage to the Bluetooth modem itself.
5. Phone off the phone and the Bluetooth module is hot. The damage was due to a shorted component. If a Bluetooth modem was hot then most likely a Bluetooth modem was damaged.
5 Tips For Bluetooth Autos:
1. Do not switch the Bluetooth all day in a crowd. The risk of virus entry will be greater, because Bluetooth is a means of entry of virus into the internal memory.
2. Do not receive incoming messages from unknown Bluetooth because most likely the virus. To anticipate this system should enable the Bluetooth device hidden on the menu so that our Bluetooth is not detected by other devices. But there are some software applications that can penetrate this defense system.
3. Change the name of your Bluetooth mobile phone with a name like this: @ hape name or your name (space) (exclamation point).
Example: @ I! or @ 6600!. Certainly Bluetooth on your mobile phone will be safe from viruses and hacker attacks.
4. Do not use Bluetooth to excess. Bluetooth is better not to be used to receive files over 3 MB large capacity at the time of transfer of data between the phone. Because it will make Bluetooth become weak and result in damage.
5. Do not use Bluetooth for internet. Because it will make Bluetooth become damaged and slow and can result in damage to the phone software that could cause phone so often hangs and restarts.Those are some things that cause your mobile device having keusakan. Hopefully the knowledge I got from the workshop in a handyman service in the workshop can be beneficial to your mobile phone as well.
0 comments:
Post a Comment